GENERAL RULES FOR ALL CLASSES
NO
ALCOHOLIC BEVERAGES ALLOWED.
PARTICIPANTS MUST BE LICENSED DRIVERS.
TRUCKS MUST BE 4-WHEEL DRIVE. DRIVER’S
MEETING WILL BE HELD PRIOR TO START OF RACES.
ABSOLUTELY NO PASSENGERS ALLOWED. TRACK OFFICIAL DECISIONS ARE
FINAL. BOTH GENERAL AND SAFETY RULES
APPLY. IF TECH OFFICIALS DEEM YOUR
VEHICLE UNSAFE, YOU WON’T BE ALLOWED TO ENTER. AFTER THE CLASS HAS STARTED, NO
HOODS WILL BE RAISED WITHOUT A TECH PERSON PRESENT. PROTEST FEE IS $250. DRIVERS CAN ONLY PROTEST A TRUCK IN THE CLASS
IN WHICH THEY HAVE PARTICIPATED. PROTESTING WILL HAVE TO BE DONE WITHIN TEN
(10) MINUTES AFTER THE CLASS IS COMPLETED.
TRACK OFFICIALS WILL DETERMINE THE TIME THE TRUCK WILL BE CHECKED. PROTEST CAN ONLY BE MADE TO THE TRACK
OFFICIAL. AT NO TIME MAY DRIVERS GO TO
THE TRUCK OR THE DRIVER BEING PROTESTED. ONLY THE DRIVER OF THE TRUCK AND THE
TRACK OFFICIAL WILL BE ALLOWED AT THE TIME OF PROTEST RE-TECHING. THERE WILL BE NO PROTEST FEE IF TRACK
OFFICIAL REQUESTS TO CHECK YOUR VEHICLE.
YOU HAVE TO PROVE THAT YOU ARE LEGAL.
IF YOU REFUSE, YOU WILL BE BANNED FOR THE REST OF THE YEAR.
4&6
CYLINDER TRUCK CLASS
THESE ARE
STREET LEGAL TRUCKS. ANY SIZE DOT TIRES
ALLOWED (NO CUTS). BODY, FRAME AND DRIVE MUST BE OF SAME MAKE. INSIDE OF TIRES
MUST NOT EXCEED THE BODY. FENDER WELL TRIMMING OK TO ALLOW FOR TIRES. NO AFTER MARKET BLOCKS OR HEADS. FACTORY TYPE SUSPENSION (LIFT KITS & TRACTION BARS OK). NO NITROUS.
NO GUTTING. NO TURBOS. CAN BE A FULL-SIZE TRUCK. NO TRACKING.
STREET
STOCK AND COUNTY ONLY TRUCK CLASSES
THESE ARE STRICTLY STREET
STOCK CLASSES. NO RACE TRUCKS ALLOWED.
NO ROLLER ROCKERS OR ROLLER CAMS UNLESS FACTORY AVAILABLE FOR THAT MODEL. MUST HAVE SMOOTH IDLE-NO EXCEPTIONS. MUST BE
ABLE TO PULL EIGHTEEN (18) INCHES OF VACUUM AT 1,000 RPM’S. VACUUM WILL
BE CHECKED RANDOMLY. ONLY DOT TIRES
ALLOWED (NO CUT TIRES). HEADERS ARE OK
BUT MUST BE CAPPED. NO SUSPENSION
MODIFICATIONS BESIDES LIFT KITS. NO
TRACTION BARS OF ANY KIND ARE ALLOWED. TRUCK MUST SIT LEVEL OR HIGHER IN REAR. DUAL EXHAUST OK. EXHAUST MUST COME PAST CAB. ALUMINUM INTAKE OK. CARB MUST BE HOLLEY SQUARE BOWL, SINGLE
INLET, SINGLE PUMP, VACUUM SECONDARIES.
MAX 650 CFM. MUST HAVE FULL
BODY. NO GUTTING OR BODY SWAPS. MUST HAVE NO LESS THAN FACTORY NUMBER OF
SPRINGS. MUST HAVE FACTORY TRANSMISSION
(NO STALL CONVERTERS OR TRANS BRAKES).
MUST HAVE FACTORY FUEL PUMPS. ALL
ACCESSORIES MUST BE IN PLACE (I.E. FANS, ALTERNATORS, BELTS, ETC.) CAN HAVE A FLOOR OR AFTER MARKET
SHIFTER. MUST HAVE FACTORY
IGNITION. NO TRACKING.
HOT STOCK
TRUCK CLASS
DOT TIRES NO LARGER THAN
38"-NO CUTTING OR ALTERING. MUST
HAVE DRIVESHAFT SAFETY LOOPS. MAXIMUM OF
477 CUBIC INCHES. NO TURBOS. NO NITROUS.
RACE FUEL OK. PERFORMANCE CAMS
OK. MUST PULL A MINIMUM OF 12"
VACUUM AT 1100 RPM. NO AFTERMARKET HEADS
OR BLOCKS. NO ALUMINUM HEADS. MAXIMUM 770 CFM CARB. DUAL LINE OK.
NO MECHANICAL CARB. SINGLE CARB
ONLY. AFTERMARKET FUEL PUMP OK. AFTERMARKET IGNITION SYSTEMS OK. FUEL TANK DISPLACEMENT OK. OPEN HEADERS OK. RACE SEATS OK. STAHL CONVERTERS OK. NO TRANSBRAKE. NO RACK & PINIONS. ALL DRIVETRAIN COMPONENTS IN STOCK LOCATION
(ENGINE, TRANSMISSION, ETC.) MUST HAVE
STOCK TYPE SUSPENSION MOUNTED IN STOCK LOCATION AND AS DESIGNED ON THAT
PARTICULAR FRAME. FACTORY BODY AND
FRAME. (I.E. CHEVY MUST HAVE CHEVY MOTOR. FORD MUST HAVE FORD MOTOR ,ETC.) NO
TRACTION BARS. NO LADDER BARS. NO CAL TRACKS. NO FLOATERS OR ANYTHING RELATED TO THESE
SYSTEMS. NO BODY SWAPS. FULL BODY TRUCK. NO CUTTING OR LOCATION ALTERING OF ANY KIND
TO THE BODY, FIREWALLS, BEDS, ETC. ALL
BODY MUST BE ON TRUCK. TAILGATES AND
BUMPERS ARE OPTIONAL. MUST HAVE LIGHTS. DASH MUST STILL BE IN TRUCK. LEATHER OR CARPET CAN BE REMOVED FROM THE
FLOOR OF THE CAB OF TRUCK. MUST HAVE
GLASS WINDOWS. NO LEXAN. DRIVER MUST WEAR HELMET AND SEAT BELT. NO COILOVER SHOCKS ON REAR. MINIMUM 4 LEAF SPRINGS. TRUCKS WILL BE PUMPED AT RANDOM. NO TRACKING.
PRO STREET
TRUCK CLASS
DOT ONLY – MAXIMUM 40 INCH
TIRE-NO CUTTING OR ALTERING. AFTER MARKET INTAKE AND/OR HEADERS OK.
BODY OR SUSPENSION LIFTS OK. NEEDS TO HAVE A MINIMUM OF FOUR (4) LEAF
SPRINGS. TRACTION BARS ARE ALLOWED. NO TRANS BRAKES. HYDRAULIC OR SOLID FLAT TAPPET CAMS OK.
MECHANICAL SECONDARY CARBS OK. RACING FUEL OR PUMP GAS ONLY. NO NITROUS OR
ALCOHOL MIXES. AFTER MARKET IGNITION SYSTEMS OR REV LIMITERS OK. NO AFTER
MARKET HEADS OR BLOCKS. NO DOMINATORS: 850 CFM LIMIT.
UPRIGHT HEADERS AND ROLLER CAMS ARE ALLOWED. DRIVE SHAFT LOOPS REQUIRED & LOOPS MUST
COVER U-JOINTS. NO TRACKING. MUST HAVE FIRE EXTINGUISHER.
SUPER
STOCK TRUCK CLASS
FULL-SIZE TRUCKS. DOT ONLY – MAXIMUM 44 INCH TIRE. SINGLE CARB ONLY. NO NITROUS, NO ALCOHOL, NO TUNNEL RAMS WITH
SPLIT DOMINATORS. ALUMINUM INTAKES OK. NO SHEET METAL INTAKES ALLOWED. NO ALCOHOL CARBS. STOCK TANK IN STOCK LOCATION OR TANK IN THE
BED IS OK. AFTER MARKET OR ALUMINUM
HEADS OK. ABSOLUTELY NO ALUMINUM OR CAST
IRON HI-PERFORMANCE BLOCKS. FACTORY BODY
AND FRAME. (I.E. CHEVY MUST HAVE CHEVY MOTOR. FORD MUST HAVE FORD MOTOR ,ETC.) FENDER WELLS MAY BE CUT NO MORE THAN THREE
INCHES FOR TIRE CLEARANCE. ABSOLUTELY NO
GUTTING OR ALTERING IN ANY FORM INCLUDING FIREWALL. NO CHAIN DRIVES. ENGINE AND DIFFERENTIAL IN STOCK
LOCATION. TRANS BRAKES OK. STALL CONVERTER OK. MUST HAVE THREE (3) WORKING LEAF
SPRINGS. TRACTION BARS AND LADDER BARS
OK. SLIDERS ALLOWED. FLOATERS ALLOWED. RELOCATION OF REAR SHOCKS OK – NOT TO EXCEED
TOP OF FRAME RAIL. ANY OEM FRONT AND
REAR DIFFERENTIAL AND TRANSMISSION ALLOWED. MUST HAVE MINIMUM 4 PT HARNESS
& MINIMUM 5 PT CAGE. RACE SEATS REQUIRED. SUPER STOCK TRUCKS MAY BUMP TO PRO STOCK WITH
CUT TIRES. DRIVE SHAFT LOOPS REQUIRED &
LOOPS MUST COVER U-JOINTS. NO TRACKING. MUST HAVE FIRE EXTINGUISHER.
NO TRACKING.
PRO STOCK CUTS TRUCK CLASS
ANY SIZE CUT TIRES. NO PADDLES. NO NITROUS OR ALCOHOL. NO DUAL CARBURETORS OR SPLIT DOMINATORS. ANY
FACTORY BODY ALLOWED. FIBERGLASS BODY PARTS ALLOWED. GUTTING IS
ALLOWED BUT MUST HAVE BED SIDES. WHEELS AND TIRES WILL MATCH UP UNDER THE
FENDER AS FAR AS LENGTH IS CONCERNED. ENGINE SWAPS ARE ALLOWED. NO ALUMINUM BLOCKS. ALUMINUM HEADS ARE OK. SHEET METAL INTAKE OK. MOTOR CAN BE SET
BACK NO MORE THAN TWELVE (12) INCHES FROM THE CENTER OF THE FRONT AXLE TO #1
SPARK PLUG. UP OR DOWN DRAFT HEADERS OK. MUST HAVE 6
POINT ROLL CAGE. FRAME RAILS MINIMUM DIMENSIONS OF 2”X3” OR ANY
FACTORY FRAME OR FRAME RAILS. NO TUBE FRAMES. 3-LINK FRONT SUSPENSION
OK. FOUR LINK SUSPENSION ALLOWED. COIL OVER SHOCKS
ALLOWED. CHAIN DRIVES ALLOWED. DRIVE SHAFT LOOPS REQUIRED & LOOPS MUST COVER U-JOINTS. FIRE SUIT REQUIRED. MUST WEAR FULL FACE HELMET IF WINDSHIELD IS ABSENT. TRACKING ALLOWED. MUST HAVE FIRE EXTINGUISHER.
